Bohning Blazer Nocks 6.5mm: ZN49

Bohning Blazer 6.5mm nocks Each : ZN49

Bohning Blazer Nock to fit 6.5mm Super Uni Bush

Bohning's Blazer® Nock fits standard carbon shafts with an ID of .246" (6.25mm, but commonly known as 6.5mm) and Super UNI Bushing systems. The Blazer® Nock features a double-lock throat and a raised index. Its throat size is .120" (3.05mm) and each Blazer® Nock weighs an average of 9.0 grains (583.2 mg). Tech tip: for easier insertion and indexing, apply a small amount of Bohning's Tex-Tite or Seal-Tite Wax to the nock shank. NOT ALL BRANDS OF NOCKS ARE CREATED EQUAL At Bohning, every nock style must pass the following steps before introduction to the market: 1. Computer simulations identify potential weak points. 2. Destructive testing methods expose possible design flaws or material defects. 3. Accelerated life cycle testing using a custom-built bow is performed at kinetic energy levels exceeding 110 ft-lbs (nearly twice that of most hunting bows). A single nock must withstand over 1000 shots or it goes back to step 1.

Bohning Nock Testing Method Video Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.