Beiter V-BOX Adapter 1/4 OUT - 5/16 x 1" (25mm) : BR53

Beiter V-BOX Adapter 1/4 OUT - 5/16 x 1" (25mm)

The OUT Adaptor is used for example : either forward between the V-Box 5/16 internal thread and a 1/4 inch Cap Weight female thread, or in the rear of the V-Box where the end of the Stabiliser has a 1/4 inch female thread.

Disc Weights and Spacers between Rod and V-Box fit over this adaptor. There is a small amount of length adjustment to adjust for the number of Weights and Spacers used when tightening the V-Box onto the Rod or Weight. There is also a longer 2 inch OUT adaptor to take a greater number of Weights and Spacers.

About The Beiter V-Box

The Beiter V-BOX is the base of a multifunctional dampening system for stabilisers

The stiffness of the V-BOX can be modified with the interchangeable membranes, each of which have different properties

The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors

The Beiter V-BOX has not only been developed for the Beiter Centralizer, but is universal and can be used with almost all other stabiliser systems!

See BR50 for more info